Although I sewed a proper muslin to test the fit of the Colette Laurel, I decided to further test fit and construction by sewing and entering another version in the competition. I’d had this stripy silky fabric in my stash for a number of years. I’d fallen in love with the muted colours (like the colour of shale or slate when wet) but had no idea what to do with it. The lines are not regular enough to create optical illusions with clever cutting and I didn’t want to break them up anyway. When Laurel came out with only bust darts to break up the pattern I decided now was its moment in the sun and it seemed the obvious choice for my second entry.
Dabbling in cloning
Pattern Used: Colette Patterns Laurel (released March 2013)
Size and Version: Size 14 & Versions 1/2/3 (it’s hard to say which because I didn’t use many of their features, just the basic dress)
Modifications: I decided against the drafted sleeves as I feared they’d elide with the main dress causing one big mass o’ fabric. The last dress I sewed had nice little cap sleeves so I decided to recreate them and pair them with a peter-pan collar in solid colour (black nubby silk) to bring out the pattern. For the cap sleeves, I used the included sleeve pattern, but just cut it off in a straight line under the front and back notches. (I did make sure this worked by sewing a draft on to my muslin.) I drafted the collar myself.
Fit from pattern: Size 14 fitted well across the bust, but was too large everywhere else. I also found the bust dart points were too high, so I lowered them (and they still look high in the photos). I took out about 4 inches around the waist and hip circumference; 0.5 at each back waist dart, and 0.75 at the side seams front and back, graduating from nothing just below the bust. This seemed to make the muslin fit, but after finishing the final garment I decided it was still too large/sacky, and took out another 3 inches by sewing down each side seam, again from below the bust.
Construction: Because the fabric is thin and I didn’t want it clinging to everything, I underlined AND lined this dress. I used muslin (in the British English sense of the word), this has given it a nice spongy feel. The lining is of unknown fibre, but is a Pierre Balmain remnant, apparently lost in a West German warehouse for the last 30 years! I have never caught my man-outside-Sainsbury’s telling porkie-pies, so I’m generally convinced that this is true.
I basted the underlining to the fashion fabric round all edges and then treated as one. Because I was lining the dress I didn’t follow the pattern instructions, but used, instead, what is rapidly becoming my favourite construction method. Sewing the lining and fashion fabric right sides together at the neck and armholes, then pulling the back pieces right-way-out through the shoulders. The zip is then inserted and the side seams finished last. Because I’d sewn the sleeves and collars identically, with the solid fabric sewn to the lining fabric along the outside edges, I treated them the same when attaching the lining to the dress fashion fabric. That is, I just sandwiched them between the lining and fashion fabric so that when I turned the dress the right way out, the were in place and caught in the seams (if that makes any sense at all!).
Feelings on the final dress: I wasn’t sure if I would like this dress. Because of my shape I try and steer clear of anything that falls straight from the bust. The fabric I used is silky, and so I just about avoid the sack look (IMO), but I did take the sides in quite considerably just before hemming, to give it a better fit; possibly too much as there is a little pulling across the back. That said, I like it and I will wear it. Probably to up-market day-dos, like a conference or networking.
Lessons learnt & future focus:
- I need to do Full Bust Adjustments from now on. I have to face the fact that choosing the size based on my bust measurement and scaling down the waist and hips doth not a good fit make elsewhere
- D’oh, when drafting the collar (which wraps round from CF to CB), I drafted a piece for the front and a piece for the back, sewing them together at the shoulder. Because I had a top collar, under collar with fusible interfacing, fashion fabric, underlining and lining all seamed at the shoulder, this gave me a seam with 12 (six fabrics x tw0 for the folded over allowance, you follow?) layers of fabric to sew through. I could’ve just eliminated shoulder seam on the collar…
- Silky fabrics, silky fabrics, must learn to cut silky fabrics on grain (although please note that the stripes on this fabric are not on grain anyway, so they squiff off to the right on purpose), and to sew them well (sewing this really was like walking on wet shale)
- Zips, in silky fabrics; mine is bubbly, not good
- Hemming, argh, I’m always too impatient and for some reason I can never cut a straight one. I really need to make sure I spend the time perfecting this. I had hoped with the addition of the underlining that you wouldn’t be able to see the hem, but you can and it’s bubbly
Make again?: I’m going to have to say… No. I like this dress and I love my other one, but I sewed these two dresses for the competition. I thought it would be interesting to see if I could make something I would normally avoid, look good on me. I’ve concluded that I prefer shaping at the waist.
Notes on the Pattern: Although I used an alternative method to the instructions, I did read through them before starting to get a basic idea of the pattern, and they are very well written and easy to understand. I like the hand-holding explanations of common sewing terms. I think they can up a new seamstress’s game quite quickly (I mean, who ever learnt about stay-stiching from a Burda Magazine pattern?).
Back collar and cap sleeve; beautiful colours
Front collar & cap sleeve