Ah, yes, so that’s where two and a half months goes to. In amongst the job hunting, sewing has been taking place (albeit not as much as I would have liked) and I’m ready to reveal the first item in my summer sewing plan, Colette Clovers.
The pattern calls for a fabric with drape. I was worried throughout the construction, that I picked a fabric which was too stiff. It’s sort of a baby corduroy. In the end I think my fabric choice worked well in all but one respect; it caused the waist band to sew up a little tighter than my muslin fabric. But it’s also a little difficult to tell because of that whether the wrinkles are caused by fit or fabric.
Size & Alterations:
I started with a size 14. When I first tried my muslin on I was a little disappointed. It looked good round the legs, but I had flappy droopy poulter-wang crotch syndrome. I started by pinching this out, planning to take a wedge out of the front crotch rise. However, on reading Colette’s sew-along posts for this pattern, I decided that the problem was more that the waist was too big and thus sitting too low. It was also too loose round the hips, so I took it in from the lower hip up to the waist by about three inches.
This solved my dodgy sounding “front area” problem. I then added length to the back crotch rise as the back at the waist was dipping down a little.
In the finished article these alterations were perfect apart from the waist. With hindsight, I should have made the waist a little looser to accommodate the stiffer fabric I was going to use (or it could just be that I put on some weight since the muslin; sitting around at home applying for jobs all day will tend to do that to you.)
I love Colette’s pattern instructions. They are simple, concise and easy to understand, and backed up with a wealth of extra material online. I read the preamble to these instructions (rather than diving straight in) and got the idea to draw round the pattern pieces with tailor’s chalk. Yes, this is not new, my mum was doing it in the 60s I suppose, but I’d never really considered forgoing pinning. What convinced me was the thickness of my double layer of fabric. I was never going to get a pin through that. I’m now hooked on tailor’s chalk and have been using it ever since (more of that later).
Instead of a simple inside leg and crotch seam I decided to try out flat felling to make it a bit more jean-ey. I’m glad I did. I’ve got a nice neat seam which will hopefully stand up to some wear. I used an orange cotton thread for the top stitching, which adds to the effect. I finished the out side seams using a Hong Kong finish with coordinating cotton bias binding. Other than this I followed the instructions, except that I forgot to try Colette’s interesting method for attaching the waist-band facing. I got carried away by the finishing line and thus forgot… D’oh.
Wearability: make again?
I’ve worn these trousers multiple times since, despite the waist band being too tight. I love them. They coordinate with, and have brought into heavy use, other me-made items. I’ve got at least another five or so versions of this pattern in my head, but I may try to limit myself to two or three more! OK, before I adjudge that excessive, one pair will be a work version and another a brightly patterned version to tie in with the patterned trouser trend (although, by the time I get round to making them, that trend may be over… oh, well).
Anyway, in the spirit of Criticism is Good, any thoughts on the fit of these trews? I personally like it (i.e. it feels like it fits), but are there any obvious adjustments you’d make based on my wrinkles!